Gate Valves

1

HANDWHEEL The spoked handwheel is fabricated from steel pipe. The hub is coupled with the yoke sleeve by means of a key. Larger valves are equipped with a bevel or spur gear gearbox unit.

2

YOKE SLEEVE The yoke sleeve is made from cast aluminium bronze having high resistance to wear and a high melting point.

API 6A Gate Valve

1

HANDWHEEL The spoked handwheel is fabricated from steel pipe. The hub is coupled with the yoke sleeve by means of a tongue

2

GLAND AND FLANGE They are in forged steel and are supplied in two pieces, self aligning design to permit the gland to descend parallel to the stem even if the eyebolts are unevenly tightened.

Double Block Bleed Gate Valves

1

HANDWHEEL The spoked handwheel is fabricated from steel pipe. The hub is coupled with the yoke sleeve by means of a tongue.

2

YOKE SLEEVE The yoke sleeve is made from cast aluminium bronze having high resistance to wear and a high melting point. It is designed to permit removal from the bonnet or the yoke whilst the valve is in service. Gate valves 6* class 600 and above are fitted ball thrust bearings.

Expanding Gate Valve

1

The spoked handwheel is fabricated from steel pipe. The hub is coupled with the yoke sleeve by means of a tongue.

2

They are in forged steel and are supplied in two pieces, self aligning design to permit the gland to descend parallel to the stem even if the eyebolts are unevenly tightened.